Blog

DIY Maintenance: How to Remove Plastic Auto Body Fasteners

Automotive fasteners are invaluable when it comes to keeping the important parts of a car together, but there may come a time when you need to take one out. Whether a part needs to be repaired or replaced, fasteners have to be properly removed to get the work done. It's not always easy to know how to remove plastic auto body fasteners without breaking them or causing other damage, so here are a few tips to make the job easier.

How To Remove Plastic Auto Body Fasteners

The beauty of plastic automotive fasteners is that they give you flexibility. They are easier to work with than metal bolts or rivets and can be used in many different applications. A downside of these fasteners is that they are more prone to breaking than metal clips or screws. By removing plastic fasteners carefully and methodically, you may be able to reuse them in your repair job.

• Understanding Different Types of Plastic Fasteners: To start the process, identify the type of fastener you are trying to remove. Some varieties are pushed into place, screwed into place and clipped into place. Each type will have different removal steps.
• Get Tools You Will Need: It's also important to have the right tools on hand for the job. Flathead screwdrivers, flat putty knives or specialized trimming tools are good choices for removing plastic fasteners. When dealing with a plastic screw, you will also want to have a screwdriver that has a matching drive tip for smooth removal.

Removing Push-Type Fasteners

Push-type fasteners are very common in both interior and exterior car projects, but they can be tricky to remove. Start by gently prying the head of the fastener with a flathead screwdriver or some other flat and sturdy tool. If there is a center pin, lift that out first and it will be easier to pull out the rest of the fastener.

Removing Screw-Type Fasteners

For screw-type fasteners, get the appropriate screwdriver for the type of screw. Turn the screw counterclockwise to release the threads from the setting. If the screw is reluctant to move, gently increase the pressure. Be careful not to push too hard and break the fastener since it can be hard to get broken parts out of the setting.

Removing Clips and Clamps

You should also consider how to remove plastic auto body fasteners such as clips and clamps. In general, you just need to pry apart the non-connected ends of the clip and pull it away. Make sure not to pull the ends too far apart or you may put too much pressure on the hinge and break or bend it.

Make Repairs Easier By Learning How To Remove Plastic Auto Body Fasteners

At some point, most fasteners on a car will need to be removed or adjusted so important parts can be repaired and replaced. Taking these fasteners out the correct way will make your work easier, so it's worth understanding how to remove plastic auto body fasteners. With the right tools and a gentle touch, the process can be simple. When you're ready to buy your new supply of fasteners, shop with ROGO Fastener.

Sources:

• https://www.youtube.com/watch?v=pQbeatWr4SQ&ab_channel=DIYwithMichaelBorders
• https://rogofastener.com/page/blog/3-applications-for-plastic-automotive-fasteners.html
• https://www.autoevolution.com/news/how-to-remove-panel-clips-retainers-and-trim-rivets-60970.html
• https://www.bobvila.com/articles/types-of-screwdrivers/
• https://www.imperialsupplies.com/shop-talk/removing-and-replacing-body-clips
• https://www.assemblymag.com/articles/89275-fasteners-driving-into-plastic-edge-wise

Related Articles

These articles might be interesting for you as well: